Finding an HVAC system can be as daunting for a new homeowner as working on the HVAC system itself. The more prepared you are on this topic, the less of a disaster it will be. These tips will help you choose a more efficient HVAC contractor than you normally could.
Be aware of the type of system that is installed in your home prior to calling a contractor to fix it. It is important to understand what model it is and which brand it is. Also, if it has been serviced before, you should have that information handy. The contractor will likely need all of this information.
If problems arise with the HVAC system, check the entire house before contacting someone to come for repairs. Note which rooms are hot and which are cold. This can help contractors quickly figure out the issue and how to fix it easily and quickly.
Know what you need before you hire a contractor. It’s hard for these contractors to give phone estimates without seeing the current system you have. If you can’t explain anything to them, this will be even more difficult. Learn this information to start with.
To make sure your condenser fan works properly, keep the fan blades and the coils clean. Before you do clean the coils and fan blades, always take the precaution of turning off all power to the unit. In addition, always remove all debris such as leaves from the outside condenser unit.
Make certain that you clean your condenser when the weather begins to warm. Make sure to turn off the fan’s power first to be safe. Next, pop off the grill, pull out the blades and start cleaning them and the unit itself off gently.
Keep your outdoor units free of debris when your cutting grass. Direct the clippings away from the equipment. The same should happen if you are blowing leaves, so be especially careful when you are going by your exterior HVAC devices whenever you are moving debris.
If your fan condenser has oil ports, you must lubricate it once per year. These ports have a metal covering. Sometimes it is rubber. Choose an oil graded SAE 20, it is non-detergent and lightweight. Place about 10 drops into each of the ports, taking care that it does not overfill.
A good way to save money with your air conditioning is by installing a programmable thermostat. It may save you as much as 10 percent of your overall utility bill if you turn your thermostat down by 10-15 degrees for a portion of the day. Some can even be controlled from a computer.
Save energy use and money by turning off the air conditioner if there is nobody home. Even though the house will get hotter, it won’t get too bad if the unit is off. Leaving the system on all day will cost a lot of money in terms of electricity.
It’s messy for a homeowner when their heating and cooling system goes down. But, if they get the right kind of information before they get started with this, it won’t be so bad. The suggestions listed will certainly lead you down a path towards positive heating and cooling function throughout the year.